View J3011G21DNLT_6600039.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 rohs peak wave reflow temperature rating 245c j0c smt product, reduced size and low cost alternative to jv series meets ieee 802.3 specification high performance for maximum emi suppression minimum 1500vrms isolation per ieee 802.3 requirement usa 858 674 8100 germany 49 7032 7806 0 singapore 65 6287 8998 shanghai 86 21 62787060 china 86 755 33966678 taiwan 886 3 4356768 rohs compliant part no. tx rx 1-65 mhz 1-10 mhz 30 mhz 60-80 mhz 1-10 mhz 30-60 mhz 60-100 mhz 1-50 mhz 50-130 mhz @ 60 hz 1 min j0c-0003nl 1ct:1 1ct:1 down no no no -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 j0c-0004nl 1ct:1 1ct:1 down no no yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 j0c-0005nl 1ct:1 1ct:1 down no yes no -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 j0c-0006nl 1ct:1 1ct:1 down no yes yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 jv006i21nl 1ct:1 1ct:1 down no no yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 jv011i21nl 1ct:1 1ct:1 down no yes yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 jv026i21nl 1cts:1 1ct:1 down no yes yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 j3011g21dnl 1ct:1 1ct:1 up g/y yes yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 j3026g01dnl 1cts:1 1ct:1 up g/y yes no -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 j3026g21dnl 1cts:1 1ct:1 up g/y yes yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 jx30-0005nl 1ct:1 1ct:1 up g/y yes yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 notes: 1. leds left/right: g = green; y = yellow. 2. add sufx t for tape & reel option (e.g. j0c-0004 t ). 3. extended temperature: -40 to 85 c description: 100 base-tx (fast ethernet) surface mount rj45 single port (1x1) tab-up/down with or without leds integrated magnetics connector, designed to support applications such as: set top box and network interface cars (nic). features and benefts: common mode rejection (db min) crosstalk (db min) return loss (db min) 100 ( 15 ) insertion loss (db max) electrical specifcations @ 25c - operating temperature 0c to +70c leds l/r bst circuit emi finger turns ratios hipot (vrms min) tab option up/down 1 3 rj45 durability test rating part number mating force (max) unmating force (max) durability plug to jack retention ( min) j0c/jv/j3 series 5 ibs./2.268 kgs. 5 ibs./2.268 kgs. 750 insertions 20 ibs./9.072 kgs. smt contacts j0c j30 jv0 3 j409.n (05/13) pulseelectronics.com pulsejack? surface mount 1x1
2 rj45 material specifcation part number shield contact msl rating material finish material plating area solder area material specifcation j0c/jv/j3 series brass 20-40 inches thick nickel over brass phosphor bronze (x) inches gold over 30-80 inches nickel tin matte fnish high temp. thermoplastic ul 94 v-0 1 housing notes: 1. connector dimensions comply with fcc part 68 dimension requirements. 4. nl parts are tin matte fnish over nickel. 2. msl = moisture sensitivity level rating: 1-5 (highest rating = 1, lowest rating = 5 3. (x) = 30 inches gold for jv and j30 platforms and 15 inches gold for j0c platform. 3 4 2 j0c platform schematics j0c-0003nl/j0c-0004nl j0c-0005nl/j0c-0006nl 1 4 2 3 5 6 7 8 td+ ct td- rd+ ct rd- nc 1 : 1 transmit 1 : 1 receive cable side pcb side to phy gnd* tx+ tx- rx+ rx- 1 2 3 6 5 4 8 7 1 : 1 transmit 1 : 1 receive 1 4 2 3 5 6 7 75 75 75 75 8 td+ ct td- rd+ ct rd- nc pcb side to phy gnd cable side tx+ tx- rx+ rx- 1 2 3 6 5 4 8 7 note: connect gnd to pcb ground. j409.n (05/13) pulseelectronics.com pulsejack? surface mount 1x1
3 j0c006 jv011 jv platform schematics 2 1 3 4 6 5 1 2 3 6 4 5 7 8 td+ ct td- rd+ ct rd- tx+ tx- rx+ rx- pcb side to phy cable 1 : 1 transmit 1 : 1 receive 1 2 3 6 4 5 7 8 tx+ tx- rx+ rx- cable 2 1 3 4 6 5 td+ ct td- rd+ ct rd- pcb side to phy 1 : 1 transmit 1 : 1 receive 0.001 75 75 75 75 75 c1 shield jv026 2 1 3 4 6 5 td+ ct td- rd+ ct rd- pcb side to phy 1 2 3 6 4 5 7 8 tx+ tx- rx+ rx- cable 1 : 1 transmit 1 : 1 receive 0.001 75 75 75 75 c1 shield j409.n (05/13) pulseelectronics.com pulsejack? surface mount 1x1
4 j3 platform schematics j3011 j3026 jx30-0005nl 3 5 4 7 6 8 9 10 1 2 3 6 4 5 7 8 td+ ct td- rd+ ct rd- tx+ tx- rx+ rx- pcb side to phy cable 1 : 1 transmit 1 : 1 receive 75 c1 0.001 75 75 75 3 5 4 7 6 8 1 2 3 6 4 5 7 8 td+ ct td- rd+ ct rd- 9 10 n/c tx+ tx- rx+ rx- pcb side to phy cable 1 : 1 transmit 1 : 1 receive 0.001 75 75 75 75 3 5 4 7 6 8 1 2 3 6 4 5 7 8 td+ td- rd+ rd- 9 10 tx+ tx- rx+ rx- pcb side to phy cable 1 : 1 transmit 1 : 1 receive ct2 ct1 ct1 0.001 75 75 75 75 j409.n (05/13) pulseelectronics.com pulsejack? surface mount 1x1
5 j0c platform mechanicals j0c-0004nl/06nl emi fingers emi fingers j409.n (05/13) pulseelectronics.com pulsejack? surface mount 1x1
6 jv platform mechanicals jv series dimensions : inches mm unless otherwise specified, all tolerances are .010 0,25 jv0xx121 date code country of origin j409.n (05/13) pulseelectronics.com pulsejack? surface mount 1x1
7 j3 platform mechanical j3 series d imensions: inches mm unless otherwise specified, all tolerances are .010 0,25 jx30-0005nl & j3026g21d with emi tabs j30xxgx1d date of code country of origin j30-0005nl j3026g21d date of code country of origin j409.n (05/13) pulseelectronics.com pulsejack? surface mount 1x1
8 j0c application note this line of 10/100base-tx smt rj45 1x1 connector magnetics modules has been specifcally designed for the implementation of a 10base-t and 100base-tx transmission over data-grade unshielded twisted pair cable (utp-3, 5e and 6). the connectors provide excellent emi fltering and are suitable for adapter card and multiport applications. pulse has worked closely with the leading ic manufacturers in providing these 10/100 solutions, thereby assuring compatibility with each transceiver. the jc0 series meets the stringent open circuit inductance requirements imposed by ieee. when an 8ma dc current is applied across the transformer windings, the transformer will provide at least 350 h. the transformers used in each module also provide 1500vrms minimum isolation, wide bandwidth with minimal attentuation and fast rise times to minimize system level jitter. the 1x1 smt rj45 connectors manufactured by pulse are designed to meet all published specifcations after exposure to surface mount soldering temperatures. the smt are robust enough to withstand convection and infrared refow solder temperatures. additionally, compliant leads provide excellent solder-joint reliability with a coplanarity of 0.10 (0.004). note: modules are packaged in trays, unless tape & reel is specifed (ex: j0c-0003 nl for trays and j0c-0003nl t for tape & reel). j0c-0003nl/04nl connector pcb layout recommendations: 1. for maximum emi suppression (electromagnetic interference) 3. connections between the 10/100 ic and the place the decoupling capacitors adjacent to vcc and 50 smt connector should be direct (ideally no change connections. in direction) and of minimum length. 2. connections to ground should be as short as possible. j409.n (05/13) pulseelectronics.com pulsejack? surface mount 1x1
9 jv application note this line of 10/100base-tx smt rj45 1x1 connector magnetics modules has been specifcally designed for the implementation of a 10base-t and 100base-tx transmission over data-grade unshielded twisted pair cable (utp-3, 5e and 6). the connectors provide excellent emi fltering and are suitable for adapter card and multiport applications. pulse has worked closely with the leading ic manufacturers in providing these 10/100 solutions, thereby assuring compatibility with each transceiver. the jc0 series meets the stringent open circuit inductance requirements imposed by ieee. when an 8ma dc current is applied across the transformer windings, the transformer will provide at least 350 h. the transformers used in each module also provide 1500vrms minimum isolation, wide bandwidth with minimal attentuation and fast rise times to minimize system level jitter. the 1x1 smt rj45 connectors manufactured by pulse are designed to meet all published specifcations after exposure to surface mount soldering temperatures. the smt are robust enough to withstand convection and infrared refow solder temperatures. additionally, compliant leads provide excellent solder-joint reliability with a coplanarity of 0.10 (0.004). note: modules are packaged in trays, unless tape & reel is specifed. please add the sufx t for tape & reel orders (ex: jvo006121 t ). add the sufx nl for rohs compliant parts (ex: jv006i21nl t for trays and jv006i21nlt for tape & reel). jv006i21 connector pcb layout recommendations: 1. for maximum emi suppression (electromagnetic interference) 3. connections between the 10/100 ic and the place the decoupling capacitors adjacent to vcc and 50 smt connector should be direct (ideally no change connections. in direction) and of minimum length. 2. connections to ground should be as short as possible. j409.n (05/13) pulseelectronics.com pulsejack? surface mount 1x1
10 j0c packaging specifcations j0c series weight .............. 7.07 gram s tape & reel ............ 90/ree l tray ....................... .8 0/tray tape ................... 44x32m m tube ...................... 25/tube t ape and reel specification tr ay specification j409.n (05/13) pulseelectronics.com pulsejack? surface mount 1x1
11 jv packaging specifcations jv series weight ................6.6 gram s tape & reel ......... .1 50/ree l tray ....................... .4 5/tray tape .................. .4 4x32m m t ape and reel specification tr ay specification j409.n (05/13) pulseelectronics.com pulsejack? surface mount 1x1
12 for more information pulse worldwide headquarters 12220 world trade drive san diego, ca 92128 u.s.a. tel: 858 674 8100 pulse europe einsteinstrasse 1 d-71083 herren - berg germany tel: 49 7032 7806 pulse china headquarters b402, shenzhen academy of aerospace technol - ogy bldg. 10th kejinan road high-tech zone nanshan district shenzen, pr china 518057 pulse north china room 2704/2705 super ocean finance ctr. 2067 yan an road west shanghai 200336 china pulse south asia 135 joo seng road #03-02 pm industrial bldg. singapore 368363 tel: 65 6287 8998 fax: 65 6287 8998 pulse north asia 3f, no. 198 zhongyuan road zhongli city taoyuan county 320 taiwan r. o. c. tel: 886 3 4356768 fax: 886 3 4356823 (pulse) performance warranty of products ofered on this data sheet is limited to the parameters specifed. data is subject to change without notice. other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. ? copyright, 2013. pulse electronics, inc. all rights reserved. j3 series j3 packaging specifcations weight ................8.1 gram s tape & reel ............ 75/ree l tray ....................... .4 5/tray tape ................... 56x32mm t ape and reel specification tr ay specification pulseelectronics.com pulsejack? surface mount 1x1 j409.n (05/13)

▲Up To Search▲

Price & Availability of J3011G21DNLT

	To Download J3011G21DNLT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .